• 4 Possible Reasons why Your Plumbing System has a Low Water Pressure


    It’s so troublesome to have a low water pressure on your faucets, showerheads, garden hose, and other plumbing fixtures. The slow water flow can be infuriating and hinder your activities. There are many reasons why your plumbing system has a low water pressure, check them out below!

    1.Pipe and Plumbing Leaks

    It’s most likely that pipe or plumbing leaks are the cause of the problem. This can greatly impact the water pressure as the water in the pipes are not properly flowing through the system–and is continually wasted due to the leakage. Aside from that, your water bills will definitely become higher so it’s best to be suspicious when your utility bills suddenly become higher than the previous reading. It’s difficult to find the exact location of the leaks since you can’t immediately notice the warning signs of water leakage until it has done a significant amount of damage. Hire a plumber to do a pipe inspection as they can find the source of the leaks faster.

    2.Corrosion Obstruction

    Old pipes that have not been replaced for so many years tend to become corroded. These corroded pipe linings can deteriorate and cause obstructions in the plumbing system. Steel and galvanized pipes are among the common materials used for houses that were built in the 1930’s. Unfortunately, these types of steel pipes can be heavily corroded after it has expired its lifespan. Repairing the pipes won’t do anything to improve the pipe lining in your household, which is why you should have it replaced instead. Pipe relining is also a great solution for this problem.

    3.The Plumbing Appliances may Have Build-Up

    Not all causes of low water pressure are large-scale repair operations. It can be something that isn’t complicated at all and can be easily fixed on your own. The low water pressure may be exclusive to only one or a few plumbing fixtures in your household. Faucets can have a weak water flow due to sediment build-up. What you can do is clean the aerator of the faucet. Your faucet will most likely have a manual from the manufacturer that has some instructions on how to properly disassemble the device and how to clean it thoroughly. Your showerhead may also have the same problem so be sure it doesn’t have any debris. It’s also possible that the showerhead is designed to be low-flow.

    4.The Main Shut Off Valve is Closed

    Some people often accidentally turn off the main valve which controls the water pressure. Of course, if this mechanism is closed or not properly turned on, the water pressure will become lower than normal. You may have unknowingly turned off the main valve so be sure to check it out before doing drastic repairs or calling the plumber.