• ROZELLE, NSW
  • 5 Main Causes of Burst Pipes

    plumberrozelle burst-pipe

    Sometimes, while you are sitting on your couch and watching your television, you might hear droplets or splashes of water somewhere. When you try to find where are those coming from, you found out that your pipe has burst causing water escapade. You became the primary witness of that dripping and burst pipes. You stare at it without knowing why it happened.

    Sometimes, homeowners do not know that their pipes had burst. This is because the bursting might have happened somewhere hard to reach or hidden sewer line for example. These burst pipe might not be given enough attention and remedy and might completely blow out. If you do not know what happened, here are some reasons of burst pipe which might lead you to prevent the dilemma.

    • Water pressure

    One of the primary reasons of burst pipes if the water pressure of the water that passes through that certain pipe. It is inevitable that in your house, you might really pay attention to little and small things that might be the primary cause of big and complicated problems. These little problems include partially clogged water pipes that might cause water pressure to increase and cause greater stress to pipes. The pipe might hammer or collide with other objects near it and might cause the pipe to burst and break.

    On the other hand, when your pipes are completely clogged due to the build-up of sediments carried by water, the pressure of the water will continually accumulate your pipe until causing it to explode or burst. That is why homeowners are advised to pay attention to early signs of pipe clogs such as the reduction of the pressure of the water that comes out your taps.

    • Frozen pipes

    A frozen pipe is one of the spells of winter season where water within your pipes tend to freeze especially when they do not have the temperature they need. Most of the times, this happens to outdoor pipes as they are exposed to the very low temperature.

    When your pipes are not insulated and it has water in it, the water they contain might freeze and might increase their volume as they turn to ice. This will cause your pipes to expand and eventually burst when they can no longer take the expansion or the increase of the volume of the water they contain. So it would be better to insulate your pipes to prepare them for the incoming winter season.

    • Tree root intrusion

    Tree root intrusion can cause too much damage to your sewer line. This is because, in order for them to enter the sewer line, they should break and wreck the pipe. Aside from that, when they are already inside the sewer pipe, they could grow as big as the size of the tree they support. This intrusion can lead to various troubles such as slow flushing due to partial clogs or complete clogging which might lead to sewage backup. Aside from that, when your sewer line is accumulated by these roots, you would be required to do many preventative techniques to remove these roots out of your sewers and to prevent them from coming in.

    • Corrosion

    Corrosion can happen to both sewer pipe and water pipe. In the sewer system, the primary cause of corrosion attacks are the corrosion-causing chemicals that might slowly eat out your sewer line walls until it completely bursts. While for water pipes, the primary cause of corrosion formation is the connection of two various materials such as steel, copper and iron without a proper connector.

    • Collapsed pipe

    This dilemma commonly happens to pipes that are buried below the ground such as your sewer lines as well as your water pipes. This is due to some environmental changes, which might cause the soil to become heavier for the buried pipes to handle. This will cause the pipe to collapse especially when they are already weaker due to old age.